Description:
The 74HC125 device is a quadruple set of bus buffer gates and features independent line drivers with 3-state outputs. The 74HC125 is designed for 2-V to 6-V VCC operation. Each output is disabled when the associated output-enable (OE) input is high.
To ensure the high-impedance state during power up or power down, OEshould be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
Included:
- MC74HC125AN
This item features:
- Wide Operating Voltage Range of 2 V to 6 V
- High-Current 3-State Outputs Interface Directly
- With System Bus or Can Drive Up to 15 LSTTL
- Loads
- Low Power Consumption, 80-µA Maximum ICC
- Typical tpd = 11 ns
- ±6-mA Output Drive at 5 V
- Low Input Current of 1 µA Maximum
- New and Authentic Component(s) - MC74HC125AN Quadruple Bus Buffer Gates With 3-State Outputs IC.
- Friendly Note: Be mindful of the many, inexpensive, counterfeits available on the market.
General details:
- We are expanding on a daily basis. If you do not see the part, or quantity of the part, you are looking for, please, let us know. We will do our best to accommodate you.
