Operational Amplifiers

Description: The Op Amp Experimenters Kit 6 contains: (2) TL064N, (2) MCP6004-I/P, (2) LM224N, (2) LM2902N, and (2) TLC27L4IN. This bundle is an ...

Description: The Op Amp Experimenters Kit 1 contains: (2) RC4558P, (2) NE5532P, (2) TL072CP, (2) LM833N, and (2) LM358P. This bundle is an excellen...

Description: The Microchip Technology Inc. MCP6273 operational amplifiers (op amps) provide wide bandwidth for the current. This family has a 2 MH...

Description: The MCP602  operational amplifiers (op amps) utilize an advanced CMOS technology, which provides low bias current, high speed operatio...

Description: The  MCP601 operational amplifiers (op amps) utilize an advanced CMOS technology, which provides low bias current, high speed operatio...

Description: The NE5230 is a very low voltage operational amplifier that can perform with a voltage supply as low as 1.8 V or as high as 15 V. I...

Description: The OPA277 precision operational amplifiers replace the industry standard OP-177. They offer improved noise, wider output voltage...

Description: The OPA2704 op amps are optimized for applications requiring rail-to-rail input and output swing. Single, dual, and quad versions ar...

Description: The OPA2336 microPower CMOS operational amplifiers are designed for battery-powered applications. They operate on a single suppl...

Description: The OPA2244 op amps are designed for very low quiescent current (50¼/channel), yet achieve excellent bandwidth. Ideal for ba...

Description: The OPA134 series are ultra-low distortion, low-noise operational amplifiers fully specified for audio applications. A true FET...

Description: The small size and low power consumption (34µA per channel maximum) of the OPA347 make it ideal for portable and battery-powered appli...

Description: These devices consist of two independent, high-gain frequency-compensated operational amplifiers designed to operate from ...

Description: The TL071IP JFET-input operational amplifiers incorporate well-matched, high-voltage JFET and bipolar transistors in a monolithic...

Description: These devices consist of four independent high-gain frequency-compensated operational amplifiers that are designed specifically...

Description: The MCP6231 operational amplifiers (op amps) family has a 300 kHz gain bandwidth product and 65° (typical) phase margin...

Description: MCP6241 operational amplifier (Op Amp) provides wide bandwidth for the quiescent current. These devices have a 550 kHz ...

Description: These devices consist of four independent high-gain frequency-compensated operational amplifiers that are designed specifically...

Description: The JFET-input operational amplifiers of the TL064IN are designed as low-power versions of the TL08x series amplifiers. They featu...

Description: The Microchip Technology Inc. MCP6004 operational amplifiers (op amps) are specifically designed for general-purpose applications....

Description: The Op Amp Experimenters Kit 4 contains: (2) OPA2137PA, (2) MC1458, (2) TL082CP, (2) MCP602-I/P, and (2) LM833NG. This bundle is an ex...

Description: Operating from 2.7 V to 16 V over the extended industrial temperature range from –40°C to +125°C, the TLV271IP is a low power, wide ...

Description: The TLC27L4 quad operational amplifiers combine a wide range of input offset voltage grades with low offset voltage drift, high inp...

Description: The TLC271 operational amplifier combines a wide range of input offset voltage grades with low offset voltage drift and high input ...

Description: The RC4558 device is a dual general-purpose operational amplifier, with each half electrically similar to the UA741, except that ...

Description: The RC4558 device is a dual general-purpose operational amplifier, with each half electrically similar to the UA741, except that ...

Description: These devices offer low offset and long-term stability by means of a low-noise, chopperless, bipolar-input-transistor amplifier ci...

Description: The LM358 consist of two independent, high-gain frequency-compensated operational amplifiers designed to operate from a singl...

Description: The LF347 is a high speed quad JFET input operational amplifier with an internally trimmed input offset voltage (BI-FET II technology...

Description: The LM833NG is a dual general purpose operational amplifier designed with particular emphasis on performance in audio systems. Th...

Description: The LM833NG is a dual general purpose operational amplifier designed with particular emphasis on performance in audio systems. This d...

Description: The Microchip Technology Inc. MCP602  operational amplifiers (op amps) utilize an advanced CMOS technology, which provides low bia...

Description: The MCP601 operational amplifiers (op amps) utilize an advanced CMOS technology, which provides low bias current, high speed oper...

Description: The MCP6002 is a dual general purpose op amp offering rail-to-rail input and output over the 1.8 to 6V operating range. This ampl...

Description: The MCP6002 is a dual general purpose op amp offering rail-to-rail input and output over the 1.8 to 6V operating range. This ampli...